SN74ALS74ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 10 hours ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 34MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 5 ns |
| Family | ALS |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 18ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS74ADR Overview
The package is in the form of 14-SOIC (0.154, 3.90mm Width). The package Tape & Reel (TR)contains it. Currently, the output is configured to use Differential. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at 0°C~70°C TA. It is an electronic flip flop with the type D-Type. The 74ALSseries comprises this type of FPGA. You should not exceed 34MHzin the output frequency of the device. There is 4mA quiescent consumption. There are 14 terminations,The 74ALS74 family contains this object. Power is supplied from a voltage of 5V volts. In terms of electronic devices, this device belongs to the ALSfamily of devices. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 14 pins. This device has the clock edge trigger type of Positive Edge. This part is included in FF/Latches. The superior flexibility of this circuit is achieved by using 2 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. The D latch operates on 5V volts. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. In addition to its maximum design flexibility, the output current of the T flip flop is 8mA. As of now, there are 4input lines.
SN74ALS74ADR Features
Tape & Reel (TR) package
74ALS series
14 pins
5V power supplies
SN74ALS74ADR Applications
There are a lot of Texas Instruments SN74ALS74ADR Flip Flops applications.
- Differential Individual
- Memory
- Set-reset capability
- Storage Registers
- ESCC
- Clock pulse
- Functionally equivalent to the MC10/100EL29
- ESD protection
- Automotive
- Frequency division
