SN74ALS74ADRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 34MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 5 ns |
| Family | ALS |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 18ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS74ADRE4 Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). The package Tape & Reel (TR)contains it. Differentialis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. Temperature is set to 0°C~70°C TA. D-Typeis the type of this D latch. The FPGA belongs to the 74ALS series. Its output frequency should not exceed 34MHz Hz. Despite external influences, it consumes 4mAof quiescent current. A total of 14 terminations have been made. The 74ALS74family includes it. Power is supplied from a voltage of 5V volts. A device of this type belongs to the family of ALS. This electronic part is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. Using 2 circuits, it is highly flexible. As a result of its reliable performance, this T flip flop is suitable for TR. There are 5V power supplies attached to it. In order to ensure high efficiency, the supply voltage should remain at 5V. With an output current of 8mA, this device offers maximum design flexibility. Currently, there are 4 input lines present.
SN74ALS74ADRE4 Features
Tape & Reel (TR) package
74ALS series
14 pins
5V power supplies
SN74ALS74ADRE4 Applications
There are a lot of Texas Instruments SN74ALS74ADRE4 Flip Flops applications.
- Common Clocks
- Bus hold
- Data Synchronizers
- Individual Asynchronous Resets
- High Performance Logic for test systems
- Dynamic threshold performance
- Data storage
- Clock pulse
- Storage Registers
- Guaranteed simultaneous switching noise level
