SN74ALS74AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74ALS74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 34MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 5 ns |
| Family | ALS |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 18ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS74AN Overview
It is packaged in the way of 14-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. T flip flop uses Differentialas the output. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. Currently, the operating temperature is 0°C~70°C TA. This D latch has the type D-Type. FPGAs belonging to the 74ALSseries contain this type of chip. It should not exceed 34MHzin its output frequency. There is 4mA quiescent consumption. Currently, there are 14 terminations. It is a member of the 74ALS74 family. The D flip flop is powered by a voltage of 5V . Electronic devices of this type belong to the ALSfamily. There is an electronic component mounted in the way of Through Hole. The electronic flip flop is designed with pins 14. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. Despite its superior flexibility, it relies on 2 circuits to achieve it. There are 5V power supplies attached to it. In order to ensure high efficiency, the supply voltage should remain at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 8mA. It has 4lines.
SN74ALS74AN Features
Tube package
74ALS series
14 pins
5V power supplies
SN74ALS74AN Applications
There are a lot of Texas Instruments SN74ALS74AN Flip Flops applications.
- ESD performance
- Control circuits
- Automotive
- Digital electronics systems
- Clock pulse
- Load Control
- EMI reduction circuitry
- Buffered Clock
- Dynamic threshold performance
- Reduced system switching noise
