banner_page

SN74ALS841DW

D-Type, Latch 4.5V~5.5V 10 Bits Tri-State Latches 74ALS Series 74ALS841 24 Pins DUAL TTL 24-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALS841DW
  • Package: 24-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 299
  • Description: D-Type, Latch 4.5V~5.5V 10 Bits Tri-State Latches 74ALS Series 74ALS841 24 Pins DUAL TTL 24-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-SOIC (0.295, 7.50mm Width)
Number of Pins 24
Weight 624.398247mg
Operating Temperature 0°C~70°C
Packaging Tube
Series 74ALS
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION
Subcategory FF/Latches
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Frequency 1MHz
Base Part Number 74ALS841
Pin Count 24
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 10:10
Polarity Non-Inverting
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 62mA
Output Current 24mA
Number of Bits 10
Propagation Delay 13 ns
Quiescent Current 38mA
Turn On Delay Time 7 ns
Family ALS
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 2.6mA 24mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW/HIGH
Number of Output Lines 10
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.65mm
Length 15.4mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ALS841DW Overview


There is an embedded version of it in package 24-SOIC (0.295, 7.50mm Width). Tube is the packaging method. It uses Tri-State as the output. A D-Type Transparent Latch logic type is used in this electrical device. A Surface Mount mount is used for mounting this electronic part. A 4.5V~5.5V supply voltage is required to operate it. A temperature of 0°C~70°C is used for operation. There are a number of FPGAs in this series, including this one. With this electronic part, there are 10 bits. In this device, there are 24 terminations. The family 74ALS841 includes it. In order to function, the supply voltage should be set to 5V. It is equipped with 24 pin count. ALS is the family name of this electronic device. This board has 24 pins on it, which is what it is designed for. It is mounted according to the Surface Mount method. This device has a total of 2 ports. It belongs to the subcategory of FF/Latches. It features maximum flexibility in design due to 24mA output current. For maximum efficiency, the supply voltage should be set to 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 10 output lines. Without external influences, it consumes 38mA quiescent current. A total of 1 elements make up this object. In addition to that, it is also characterized by POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION.

SN74ALS841DW Features


24-SOIC (0.295, 7.50mm Width) package
74ALS series
10 Bits
74ALS841 family
24 pin count
24 pins
1 elements

SN74ALS841DW Applications


There are a lot of Texas Instruments SN74ALS841DW Latches applications.

  • Pattern Generators
  • Sample and hold register
  • Clocks
  • Lamp and Display (LED)
  • Shift Registers
  • Counter control
  • Ring counter
  • Relay replacement
  • Up/down difference counting
  • Bus system register with enable parallel lines at bus side

Write a review

Note: HTML is not translated!
    Bad           Good