SN74ALS841DWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS841 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 62mA |
| Output Current | 24mA |
| Number of Bits | 10 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 7 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Output Lines | 10 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS841DWR Overview
It is embedded in the 24-SOIC (0.295, 7.50mm Width) package. Packaged in the way of Tape & Reel (TR). It uses Tri-State as its output configuration. A D-Type Transparent Latch logic type is used in this electrical device. Based on the way of Surface Mount, this electronic part is mounted. It operates with a supply voltage of 4.5V~5.5V. During operation, the temperature is set at 0°C~70°C. It is a type of FPGA belonging to the 74ALS series. The design of this electronic part is based on 10 bits. In this device, there are 24 terminations that have been designed. 74ALS841 is its family. The device works with a voltage of 5V for its supply voltage. The device is equipped with 24 pins. This electronic device belongs to the family of ALS. This board has 24 pins on it, which is what it is designed for. Surface Mount is used to mount this electronic part. In this device, there are 2 ports. In the subcategory FF/Latches, this part belongs. On the basis of its reliability, this device is well suited for TAPE AND REEL. Its output current of 24mA ensures maximum design flexibility. High efficiency requires a voltage supply of 5V. The binary equivalent of the input line is generated by 10 output lines. There are 1 elements in it. There are also other characteristics of it, such as POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION.
SN74ALS841DWR Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
10 Bits
74ALS841 family
24 pin count
24 pins
1 elements
SN74ALS841DWR Applications
There are a lot of Texas Instruments SN74ALS841DWR Latches applications.
- Network Switches
- Serial Input
- Buffer Storage
- Pattern generators
- General-Purpose Register
- Counter timers
- Parallel data synchronization
- BCD counting
- Meter applications
- Shift left with parallel loading
