SN74ALS841DWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS841 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Nominal Supply Current | 62mA |
| Output Current | 24mA |
| Number of Bits | 10 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 7 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 10 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS841DWRG4 Overview
In the 24-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. The package is in the form of Tape & Reel (TR). It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. According to Surface Mount, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. It operates at 0°C~70°C degrees Celsius. The 74ALS series is associated with this FPGA. The design of this electronic part contains 10 bits. A device such as this has 24 terminations designed. As a member of the 74ALS841 family, it falls under that category. A 5V voltage supply is required for operation. 24 pins are available on it. ALS is the family name of this electronic device. It is designed with 24 pins. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. The part is in the FF/Latches subcategory. 5.5V is the maximum voltage (Vsup) that can be supplied. A supply voltage (Vsup) greater than 4.5V is required. This device is well suited for TAPE AND REEL based on its reliable performance. As the output current is 24mA, the design flexibility is maximum. A binary equivalent of the input line is generated by the 10 output lines. POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION are other characteristics of it.
SN74ALS841DWRG4 Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
10 Bits
74ALS841 family
24 pin count
24 pins
SN74ALS841DWRG4 Applications
There are a lot of Texas Instruments SN74ALS841DWRG4 Latches applications.
- Shift left register
- General-Purpose Register
- Parallel data synchronization
- Shift Registers
- Multi-line decoders
- BCD counting
- Storage
- Decade counting
- Digital bus buffer
- Address register
