Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Number of Pins |
24 |
Weight |
624.398247mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Series |
74ALS |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
WITH CLEAR AND PRESET |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
TTL |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74ALS843 |
Pin Count |
24 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Circuit |
9:9 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
67mA |
Output Current |
24mA |
Number of Bits |
9 |
Propagation Delay |
18 ns |
Turn On Delay Time |
5 ns |
Family |
ALS |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
2.6mA 24mA |
Logic Type |
D-Type Transparent Latch |
Prop. Delay@Nom-Sup |
26 ns |
Number of Output Lines |
9 |
Translation |
N/A |
Height |
2.65mm |
Length |
15.4mm |
Width |
7.5mm |
Thickness |
2.35mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ALS843DWR Overview
In the package 24-SOIC (0.295, 7.50mm Width), it can be found. As a result, it has a packaging of Tape & Reel (TR). There is a Tri-State output configured. This electrical device has the logic type D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. A 4.5V~5.5V voltage supply is required for operation. It operates at 0°C~70°C degrees Celsius. The 74ALS series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 9 bits. In this device, there are 24 terminations that have been designed. The family 74ALS843 includes it. The device is operated when the supply voltage is set to 5V. The device is equipped with 24 pins. It is a member of the ALS family of electronic devices. The pin configuration of the device is 24. A Surface Mount mounting method has been used for this electronic part. In this device, there is a total of 2 ports available for use. The part is in the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. Based on its reliable performance, this device is appropriate for TR. Its output current of 24mA ensures maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are 9 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. This element consists of 1. There are also characteristics of WITH CLEAR AND PRESET associated with it.
SN74ALS843DWR Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
9 Bits
74ALS843 family
24 pin count
24 pins
5V power supplies
1 elements
SN74ALS843DWR Applications
There are a lot of Texas Instruments SN74ALS843DWR Latches applications.
- Flip-flops
- Relay replacement
- Parallel Input
- Automotive Body Electronics
- Counter
- Digital bus buffer
- Four-bit storage with output enable
- Stacked or Push-Down Registers
- PCs and Notebooks
- Ring counter