Parameters |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
74ALS |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
24 |
Type |
Multiplexer |
Terminal Finish |
NICKEL PALLADIUM GOLD |
Technology |
TTL |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
6 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
24 |
JESD-30 Code |
R-PDSO-G24 |
Number of Outputs |
1 |
Qualification Status |
COMMERCIAL |
Circuit |
6 x 2:1 |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
4.5V |
Family |
ALS |
Number of Inputs |
2 |
Output Characteristics |
3-STATE |
Current - Output High, Low |
2.6mA 24mA |
Output Polarity |
CONFIGURABLE |
Propagation Delay (tpd) |
33 ns |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
RoHS Status |
ROHS3 Compliant |
SN74ALS857DW Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 24-SOIC (0.295, 7.50mm Width).The package is packaged in the manner of Tube.Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC is indicated by Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to 0°C~70°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers of the 74ALS series can be used in a wide range of applications.Among its basic configurations are 24 terminations.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 24 can be found on this turn signal switch.A conductor terminates at GULL WING.The ALS family includes the logic switch.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4.5V.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.The turn signal switch has 1 outputs.It has 2 inputs.
SN74ALS857DW Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
SN74ALS857DW Applications
There are a lot of Rochester Electronics, LLC SN74ALS857DW Signal Switches / Multiplexers / Decoders applications.
- Implementing boolean functions with multiple variables
- Recording transmission
- Frequency multiplexing system
- Used to connect a single source to multiple destinations
- Speed synchronization of multiple motors in industries
- Relay
- Textile mills
- Video transmission
- Code converters
- Decimal decoder