SN74ALS869NT
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | TCO OUTPUT; COUNT ENABLE INPUTS |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| JESD-30 Code | R-PDIP-T24 |
| Qualification Status | COMMERCIAL |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Reset | Synchronous |
| Family | ALS |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| fmax-Min | 35 MHz |
| Count Rate | 35MHz |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS869NT Overview
24-DIP (0.300, 7.62mm)is a package in which this device is packaged. This configuration uses 24terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. In wires, 1elements are connected. In all, there are 24 pins on each component. As a result, it is packaged in the way of a Tube. It is included in the ALSfamily. With its 74ALSseries designation, it can be used for a range of applications. Binary Counteris selected as the logic type. Setting the operating temperature to 0°C~70°C is recommended. The mounting type is Through Hole. Providing a voltage of 4.5V~5.5Vensures higher reliability of operation. An array consists of 8bits for each element. The result may be yesin terms of Pbfree code. A major feature of this electronic device is its [0]. Supply voltages can be as low as 4.5V volts (Vsup). Up to a maximum voltage of 5.5Vcan be supplied (Vsup).
SN74ALS869NT Features
Embedded in the 24-DIP (0.300, 7.62mm) package
8 bits per element
TCO OUTPUT; COUNT ENABLE INPUTS
SN74ALS869NT Applications
There are a lot of Rochester Electronics, LLC SN74ALS869NT Counters & Dividers applications.
- Time-delay circuits
- Communications Digital Frequency Synthesizers;
- ALGEBRAIC COMPUTATION
- POWER COMPUTATION
- Signal gating
- Decade counter/decimal decode display (CD4017B）
- Programmable decade counters
- Clocks
- DIVISION
- Frequency dividing circuits
