SN74ALS873BDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR |
| Subcategory | Bus Driver/Transceiver |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Base Part Number | 74ALS873 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 4:4 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 29mA |
| Output Current | 24mA |
| Number of Bits | 4 |
| Propagation Delay | 14 ns |
| Quiescent Current | 16mA |
| Turn On Delay Time | 8 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 2 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS873BDW Overview
A package called 24-SOIC (0.295, 7.50mm Width) contains it. Packaged in the way of Tube. It uses Tri-State as the output. In this electrical device, the logic type is D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. With a supply voltage of 4.5V~5.5V, it operates. It is 0°C~70°C at the operating temperature. It is a type of FPGA belonging to the 74ALS series. It is designed with 4 bits. As far as this device is concerned, it has no terminations. 74ALS873 is the family name of it. The device is operated when the supply voltage is set to 5V. It is equipped with 24 pin count. It is a member of the ALS family of electronic devices. The pin configuration of the device is 24. Mounting this electronic component follows the Surface Mount method. In this device, there are 2 ports. There is a subcategory of Bus Driver/Transceiver for this part. There are 5V power supplies required for this machine to operate. Input Lines consist of electronic circuits, and there are 8. With 24mA, maximum design flexibility is ensured. For maximum efficiency, the supply voltage should be set to 5V. Without external influences, it consumes 16mA of quiescent current. It is also characterized by WITH CLEAR.
SN74ALS873BDW Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
4 Bits
74ALS873 family
24 pin count
24 pins
5V power supplies
SN74ALS873BDW Applications
There are a lot of Texas Instruments SN74ALS873BDW Latches applications.
- Display driver
- Address register
- Watches
- PCs and Notebooks
- Storage
- Decade counting 7-segment decimal display
- Pattern Generators
- Accumulator Registers
- Meter applications
- A/D converters
