SN74ALS874BNSR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS874 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Output Current | 24mA |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 4 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 21mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS874BNSR Overview
24-SOIC (0.209, 5.30mm Width)is the packaging method. D flip flop is embedded in the Tape & Reel (TR) package. T flip flop is configured with an output of Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. In the operating environment, the temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74ALS series. It should not exceed 30MHzin its output frequency. In total, there are 2 elements. Despite external influences, it consumes 21mAof quiescent current. It has been determined that there have been 24 terminations. The object belongs to the 74ALS874 family. Power is supplied from a voltage of 5V volts. This D flip flop belongs to the family of ALS. There is an electronic part that is mounted in the way of Surface Mount. The 24pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. The D flip flop is embedded with 2ports. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 1 output lines on it.
SN74ALS874BNSR Features
Tape & Reel (TR) package
74ALS series
24 pins
5V power supplies
SN74ALS874BNSR Applications
There are a lot of Texas Instruments SN74ALS874BNSR Flip Flops applications.
- Data transfer
- ESD protection
- ATE
- Memory
- CMOS Process
- Frequency division
- Pattern generators
- Bus hold
- Dynamic threshold performance
- Shift Registers
