SN74ALS874BNSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS874 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 4 |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 4 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 21mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Length | 15mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS874BNSRG4 Overview
24-SOIC (0.209, 5.30mm Width)is the packaging method. D flip flop is included in the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In this case, the operating temperature is 0°C~70°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74ALS series. Its output frequency should not exceed 30MHz Hz. A total of 2 elements are present. It consumes 21mA of quiescent A total of 24 terminations have been made. The 74ALS874 family contains this object. A voltage of 5V is used to power it. In terms of electronic devices, this device belongs to the ALSfamily of devices. There is an electronic part mounted in the way of Surface Mount. With its 24pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with a number of bits of 4. It reaches the maximum supply voltage (Vsup) at 5.5V. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. A power supply of 5Vis required to operate it. The D flip flop is embedded with 2ports. With a current output of 24mA , it offers maximum design flexibility. The JK flip flop is with 4 output lines to operate.
SN74ALS874BNSRG4 Features
Tape & Reel (TR) package
74ALS series
24 pins
4 Bits
5V power supplies
SN74ALS874BNSRG4 Applications
There are a lot of Texas Instruments SN74ALS874BNSRG4 Flip Flops applications.
- Supports Live Insertion
- Load Control
- Power down protection
- Guaranteed simultaneous switching noise level
- Latch-up performance
- Pattern generators
- Balanced 24 mA output drivers
- Matched Rise and Fall
- Automotive
- Buffered Clock
