banner_page

SN74ALS990DWR

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS990 20 Pins DUAL TTL 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALS990DWR
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 324
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS990 20 Pins DUAL TTL 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Series 74ALS
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature WITH READ-BACK
Subcategory FF/Latches
Packing Method TR
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74ALS990
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Nominal Supply Current 70mA
Output Current 24mA
Number of Bits 8
Propagation Delay 26 ns
Turn On Delay Time 6 ns
Family ALS
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 400μA 8mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Trigger Type HIGH LEVEL
Number of Input Lines 8
Independent Circuits 1
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ALS990DWR Overview


The 20-SOIC (0.295, 7.50mm Width) package contains it. A package of Tape & Reel (TR) has been used. There is a Tri-State output configured. This electrical device has a logic type of D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. A temperature of 0°C~70°C is used for operation. In the 74ALS series, this FPGA is located. An electronic part with 8 bits is designed. The device consists of 20 terminations that are designed to be used in conjunction with it. There is no doubt that it belongs to the family 74ALS990. The device works with a voltage of 5V for its supply voltage. The 20 pind are equipped with it. In the world of electronics, this electronic device belongs to the family of ALS. This board has 20 pins on it, which is what it is designed for. Mounting this electronic component follows the Surface Mount method. The part belongs to the FF/Latches subcategory. There is 5V power supply for it. It consists of 8 input lines from which an electronic circuit can be built. The device's reliable performance makes it a good choice for TR. The output current of 24mA makes it feature maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. There are also characteristics of WITH READ-BACK associated with it.

SN74ALS990DWR Features


20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS990 family
20 pin count
20 pins
5V power supplies

SN74ALS990DWR Applications


There are a lot of Texas Instruments SN74ALS990DWR Latches applications.

  • Serial Output Data Queuing
  • Buffer/Storage Registers
  • Buffer register
  • PCs and Notebooks
  • A/D and D/A conversion
  • Stacked or Push-Down Registers
  • Automotive Cluster
  • Up-Down Johnson
  • Parallel Input
  • Hammer

Write a review

Note: HTML is not translated!
    Bad           Good