SN74ALS992DWR
| Parameters | |
|---|---|
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | WITH READ-BACK |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS992 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 80mA |
| Output Current | 24mA |
| Number of Bits | 9 |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2.65mm |
SN74ALS992DWR Overview
It is embedded in the 24-SOIC (0.295, 7.50mm Width) package. A package of Tape & Reel (TR) has been used. It uses Tri-State as its output configuration. There is D-Type Transparent Latch logic type for this electrical device. According to Surface Mount, this electronic part is mounted. There is no supply voltage for this device. There is a temperature of 0°C~70°C at which the system operates. The 74ALS series is associated with this FPGA. Electronic parts with 9 bits are designed for this application. As far as this device is concerned, it has no terminations. This type belongs to the 74ALS992 family. In order to function, the supply voltage should be set to 5V. The 24 pind are equipped with it. It is part of the family of electronic devices called ALS. With the design of the board, there are only 24 pins. Mounting this electronic component follows the Surface Mount method. 2 ports are available on this device. Subcategory Bus Driver/Transceiver includes this part. It reaches a maximum supply voltage (Vsup) of 5.5V. There are 5V power supplies required for this machine to operate. The supply voltage (Vsup) should be greater than 4.5V. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. Due to its 24mA output current, it offers maximum design flexibility. Input lines are converted into binary equivalents by 9 output lines. Additionally, it is characterized by WITH READ-BACK.
SN74ALS992DWR Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
9 Bits
74ALS992 family
24 pin count
24 pins
5V power supplies
SN74ALS992DWR Applications
There are a lot of Texas Instruments SN74ALS992DWR Latches applications.
- Motor Drives
- Automatic test equipment
- High-speed logic
- Multistage ripple counting
- Counter control
- Pattern Generators
- Phase comparator
- Communication systems
- Counter timers
- Control circuits
