SN74ALS992DWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | WITH READ-BACK |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS992 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 80mA |
| Output Current | 24mA |
| Number of Bits | 9 |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS992DWRE4 Overview
There is an embedded version of it in package 24-SOIC (0.295, 7.50mm Width). Tape & Reel (TR) is the packaging method. Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. The supply voltage of the device is 4.5V~5.5V. During operation, the temperature is set at 0°C~70°C. 74ALS is the series number of this FPGA. The design of this electronic part contains 9 bits. In this device, there are 24 terminations. As a member of the 74ALS992 family, it falls under that category. A 5V voltage supply is required for operation. The 24 pind are equipped with it. It is part of the family of electronic devices called ALS. This board has 24 pins on it, which is what it is designed for. Mounting this electronic component follows the Surface Mount method. As far as ports are concerned, this device has 2 ports. Subcategory FF/Latches includes this part. It reaches a maximum supply voltage (Vsup) of 5.5V. There is 5V power supply for it. If the supply voltage (Vsup) is greater than 4.5V, then the device is working correctly. As a result of its reliable performance, it is well suited for TAPE AND REEL. The output current of 24mA makes it feature maximum design flexibility. Input lines are converted into binary equivalents by 9 output lines. There is also WITH READ-BACK characteristics to it.
SN74ALS992DWRE4 Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
9 Bits
74ALS992 family
24 pin count
24 pins
5V power supplies
SN74ALS992DWRE4 Applications
There are a lot of Texas Instruments SN74ALS992DWRE4 Latches applications.
- Shift right with parallel loading
- Accumulator Registers
- Pseudo-random code generators
- Automotive HEV/EV Powertrain
- Shift right register
- Display
- Parallel data storage
- Shift Registers
- Multi-line decoders
- Buffer Storage
