SN74ALS992DWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | WITH READ-BACK |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS992 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 80mA |
| Output Current | 24mA |
| Number of Bits | 9 |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS992DWRG4 Overview
In the 24-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the way in which it is packaged. Tri-State is the output configured for it. This electrical device has the logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. It operates at a voltage of 4.5V~5.5V. There is a temperature of 0°C~70°C at which the system operates. The 74ALS series contains FPGAs of this type. The design of this electronic part contains 9 bits. The device consists of 24 terminations that are designed to be used in conjunction with it. It is a member of the 74ALS992 family. With the supply voltage set at 5V, it is able to operate. With 24 pins, it is equipped. It is a member of the ALS family of electronic devices. 24 pins are used in its design. Electronic parts are mounted using the Surface Mount method. As far as ports are concerned, this device has 2 ports. Subcategory FF/Latches contains this part. 5.5V is the maximum supply voltage (Vsup). There are 5V power supplies required for this machine to operate. Ensure that the supply voltage (Vsup) is greater than 4.5V. The device's reliable performance makes it a good choice for TAPE AND REEL. With an output current of 24mA, it is highly flexible in terms of design. 9 output lines provide binary equivalents of input lines. There are also other characteristics of it, such as WITH READ-BACK.
SN74ALS992DWRG4 Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
9 Bits
74ALS992 family
24 pin count
24 pins
5V power supplies
SN74ALS992DWRG4 Applications
There are a lot of Texas Instruments SN74ALS992DWRG4 Latches applications.
- Shift right with parallel loading
- Automotive HEV/EV Powertrain
- Synchronous frequency dividers
- Network Switches
- BCD counting
- Parallel-to-Serial Data Conversion
- Buffer Storage
- Multistage ripple counting
- Relay replacement
- Pseudo-random code generators
