SN74ALS994DW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH READ-BACK |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Base Part Number | 74ALS994 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Nominal Supply Current | 82mA |
| Output Current | 24mA |
| Number of Bits | 10 |
| Propagation Delay | 27 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | HIGH LEVEL |
| Number of Output Lines | 10 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ALS994DW Overview
In the package 24-SOIC (0.295, 7.50mm Width), it can be found. Tube is the packaging method. Tri-State is used for the output it is configured with. This electrical device has Logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. The voltage supply is 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. There are a number of FPGAs in this series, including this one. 10 Bits are used in the design of this electronic part. In this device, there are 24 terminations that have been designed. The family in which it belongs to is 74ALS994. The supply voltage of the device is 5V. The 24 pind are equipped with it. In terms of electronic devices, this one is in the ALS family. With the design of the board, there are only 24 pins. Surface Mount is the method used for mounting this electronic part. It belongs to the subcategory of FF/Latches. 5V power supplies are needed to operate it. The 24mA output current gives it maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. 10 output lines generate the binary equivalent of the input lines. There are 1 elements in it. WITH READ-BACK are other characteristics of it.
SN74ALS994DW Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
10 Bits
74ALS994 family
24 pin count
24 pins
5V power supplies
1 elements
SN74ALS994DW Applications
There are a lot of Texas Instruments SN74ALS994DW Latches applications.
- Parallel data storage
- Parallel Input
- Motor Drives
- Multistage ripple counting
- Shift left register
- Automatic test equipment
- PCs and Notebooks
- A/D converters
- Timers
- Counters
