SN74ALS994NT
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | Through Hole |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH READ-BACK |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | 74ALS994 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Nominal Supply Current | 82mA |
| Output Current | 24mA |
| Number of Bits | 10 |
| Propagation Delay | 27 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | HIGH LEVEL |
| Number of Output Lines | 10 |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS994NT Overview
24-DIP (0.300, 7.62mm) contains it. A Tube package is used to package it. Tri-State is used for the output it is configured with. A D-Type Transparent Latch logic type is used in this electrical device. A Through Hole mount is used for mounting this electronic part. With a supply voltage of 4.5V~5.5V, it operates. The temperature at which the machine is operating is 0°C~70°C. The 74ALS series contains FPGAs of this type. The electronic part in this image has 10 bits. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. 74ALS994 is its family. It operates with a supply voltage of 5V. 24 pins are available on it. There is a device in this electronic family called ALS. This board has 24 pins on it, which is what it is designed for. A Through Hole mounting method has been used for this electronic part. The part belongs to the FF/Latches subcategory. There are 5V power supplies attached to it. As the output current is 24mA, the design flexibility is maximum. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It follows that 10 output lines are generated from the binary equivalent of the input line. This object is composed of 1 elements. In addition, WITH READ-BACK characterize it.
SN74ALS994NT Features
24-DIP (0.300, 7.62mm) package
74ALS series
10 Bits
74ALS994 family
24 pin count
24 pins
5V power supplies
1 elements
SN74ALS994NT Applications
There are a lot of Texas Instruments SN74ALS994NT Latches applications.
- Control circuits
- Multi-line decoders
- Automotive Body Electronics
- Automotive Cluster
- Digital bus buffer
- Watches
- Flip-flops
- OC-48 communication systems
- Stacked or Push-Down Registers
- Hammer
