SN74ALS996-1NT
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH READ-BACK; WITH MASTER CONTROL FOR CLOCK AND READ INPUT |
| Subcategory | Bus Driver/Transceiver |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74ALS996 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 85mA |
| Output Current | 48mA |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 5 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS996-1NT Overview
In the 24-DIP (0.300, 7.62mm) package, it can be found as an embedded module. Tube is the way it is packaged. Tri-State is used for the output it is configured with. A D-Type Transparent Latch logic type is used in this electrical device. Through Hole is used to mount this electronic part. It operates at a voltage of 4.5V~5.5V. A temperature of 0°C~70°C is set as the operating temperature. This FPGA is part of the 74ALS series. An electronic part with 8 bits is designed. As far as this device is concerned, it has no terminations. This type belongs to the 74ALS996 family. The supply voltage of the device is 5V. The 24 pind are equipped with it. It is a member of the ALS family of electronic devices. With the design of the board, there are only 24 pins. Through Hole is the method used for mounting this electronic part. As far as ports are concerned, this device has 2 ports. The part belongs to the Bus Driver/Transceiver subcategory. There are 5V power supplies required for this machine to operate. It consists of 8 input lines from which an electronic circuit can be built. Its output current of 48mA ensures maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. In addition to that, it is also characterized by WITH READ-BACK; WITH MASTER CONTROL FOR CLOCK AND READ INPUT.
SN74ALS996-1NT Features
24-DIP (0.300, 7.62mm) package
74ALS series
8 Bits
74ALS996 family
24 pin count
24 pins
5V power supplies
SN74ALS996-1NT Applications
There are a lot of Texas Instruments SN74ALS996-1NT Latches applications.
- Decade counting 7-segment decimal display
- Pattern generators
- Data acquisition
- Clocks
- Counting
- Up/down difference counting
- Timers
- TV Set-top Boxes
- Sample and hold register
- Display driver
