SN74ALS996DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH READ-BACK; WITH MASTER CONTROL FOR CLOCK AND READ INPUT |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 35MHz |
| Base Part Number | 74ALS996 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Operating Supply Current | 85mA |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 28 ns |
| Quiescent Current | 55mA |
| Turn On Delay Time | 5 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS996DW Overview
There is an embedded version of it in package 24-SOIC (0.295, 7.50mm Width). A Tube package is used to package it. Tri-State is used for the output it is configured with. D-Type Transparent Latch is the logic type of this electrical device. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C is used for operation. It is a type of FPGA belonging to the 74ALS series. This electronic part is designed with 8 Bits. The device consists of 24 terminations that are designed to be used in conjunction with it. It belongs to 74ALS996 family. The supply voltage of the device is 5V. 24 pins are available on it. There is a device in this electronic family called ALS. The device has 24 pins. Electronic parts are mounted using the Surface Mount method. This device has 2 ports that can be connected to it. In the subcategory FF/Latches, this part belongs. A total of 5V power supplies are needed to run it. The 24mA output current gives it maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. Input lines are converted into binary equivalents by 8 output lines. It consumes 55mA current from its quiescent state without being affected by external factors at all. It consists of 1 elements. There is also WITH READ-BACK; WITH MASTER CONTROL FOR CLOCK AND READ INPUT characteristics to it.
SN74ALS996DW Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS996 family
24 pin count
24 pins
5V power supplies
1 elements
SN74ALS996DW Applications
There are a lot of Texas Instruments SN74ALS996DW Latches applications.
- Automotive Cluster
- Registers
- TV Set-top Boxes
- Phase comparator
- High-speed logic
- Serial Input
- Pattern generators
- Shift right with parallel loading
- Timers
- Parallel Input
