SN74ALS996DWR
| Parameters | |
|---|---|
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH READ-BACK; WITH MASTER CONTROL FOR CLOCK AND READ INPUT |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS996 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 85mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 28 ns |
| Quiescent Current | 55mA |
| Turn On Delay Time | 5 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
SN74ALS996DWR Overview
In the 24-SOIC (0.295, 7.50mm Width) package, it is embedded. Packaged in the way of Tape & Reel (TR). It uses Tri-State as its output configuration. This electrical device has the logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. It operates with a supply voltage of 4.5V~5.5V. There is a temperature of 0°C~70°C at which the system operates. It is a type of FPGA belonging to the 74ALS series. Electronic parts with 8 bits are designed for this application. The device consists of 24 terminations that are designed to be used in conjunction with it. The family it belongs to is 74ALS996. In order to function, the supply voltage should be set to 5V. 24 pins are available on it. It is part of the family of electronic devices called ALS. 24 pins are used in its design. Electronic parts are mounted using the Surface Mount method. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. There are 5V power supplies attached to it. Electronic circuits comprise 8 input lines. Based on its reliable performance, this device is well suited to TR. As the output current is 24mA, the design flexibility is maximum. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Without external influences, it consumes 55mA quiescent current. There are also characteristics of WITH READ-BACK; WITH MASTER CONTROL FOR CLOCK AND READ INPUT associated with it.
SN74ALS996DWR Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS996 family
24 pin count
24 pins
5V power supplies
SN74ALS996DWR Applications
There are a lot of Texas Instruments SN74ALS996DWR Latches applications.
- Synchronous frequency dividers
- Up-Down Johnson
- OC-48 communication systems
- Multistage ripple counting
- Shift Registers
- A/D converters
- Parallel Input
- Counter control
- Address register
- Storage
