banner_page

SN74ALVC3651-10PQ

132 TerminationsFIFO memory IC74ALVC Series 72K 2K x 367.5ns


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-SN74ALVC3651-10PQ
  • Package: 132-BQFP Bumpered
  • Datasheet: -
  • Stock: 841
  • Description: 132 TerminationsFIFO memory IC74ALVC Series 72K 2K x 367.5ns (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 132-BQFP Bumpered
Surface Mount YES
Operating Temperature 0°C~70°C
Packaging Tray
Series 74ALVC
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 132
Terminal Finish NICKEL PALLADIUM GOLD
Additional Feature RETRANSMIT; MAILBOX
Technology CMOS
Voltage - Supply 3V~3.6V
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.635mm
JESD-30 Code S-PQFP-G132
Function Synchronous
Current - Supply (Max) 350μA
Qualification Status COMMERCIAL
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Memory Size 72K 2K x 36
Access Time 7.5ns
Data Rate 100MHz
Organization 2KX36
Memory Width 36
Memory Density 73728 bit
Parallel/Serial PARALLEL
Bus Directional Bi-Directional
FWFT Support No
Programmable Flags Support Yes
Output Enable YES
Expansion Type Depth, Width
Cycle Time 10 ns
Height Seated (Max) 4.57mm
Length 24.13mm
Width 24.13mm
RoHS Status ROHS3 Compliant

SN74ALVC3651-10PQ Overview


You will find FIFO memory chip in the 132-BQFP Bumpered package.Tray case is used for packaging.In addition to storing applications and data, the FIFO chips have a memory of 72K 2K x 36 .Keeping the temperature at 0°C~70°C will ensure reliable operation.It is a Surface Mount mounting type FIFO memory.For operation, it requires a supply voltage of 3V~3.6V .This memory logic is part of the 74ALVC series.There is a maximum operating current of 350μA in memory IC's supply.It is possible to achieve high efficiency with a supply voltage of 3.3V .132 terminations are contained in FIFO means.It is also possible to generate RETRANSMIT; MAILBOX using this FIFO memory.FIFO memory IC's maximum supply voltage is set to 3.6V .Keep the supply voltage (Vsup) above 3V for normal operation.

SN74ALVC3651-10PQ Features


72K 2K x 36 memory size
74ALVC series

SN74ALVC3651-10PQ Applications


There are a lot of Rochester Electronics, LLC SN74ALVC3651-10PQ FIFOs Memory applications.

  • Measurement Equipment
  • Multi-stage synchronizer
  • IP Camera Buffer
  • Game Consoles
  • Firmware loaders
  • Telecommunication
  • Communications
  • Laser Receiver System
  • Digital buffering
  • Notebook

Write a review

Note: HTML is not translated!
    Bad           Good