SN74ALVC7804-25DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ALVC7804 |
| Function | Asynchronous |
| Current - Supply (Max) | 40μA |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3.3V |
| Memory Size | 9K 512 x 18 |
| Clock Frequency | 40MHz |
| Access Time | 18ns |
| Data Rate | 40MHz |
| Organization | 512X18 |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Cycle Time | 25 ns |
| Height Seated (Max) | 2.79mm |
| Length | 18.415mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ALVC7804-25DLR Overview
FIFO memory chip is contained in the 56-BSSOP (0.295, 7.50mm Width) package.This FIFO memory chip is packaged as a Tape & Reel (TR) .It is possible to store data and applications on the FIFO chips as they have 9K 512 x 18 in their memory.Keeping the temperature at 0°C~70°C will ensure reliable operation.The mounting type of the FIFO memory is Surface Mount .Powered by a voltage of 3V~3.6V , it operates on a low supply voltage.The 74ALVC series includes this memory logic.40μA is memory IC's maximum operating supply current.Mounting it Surface Mount is recommended.Memory IC is a member of the 74ALVC7804 family.When the supply voltage is 3.3V there is the possibility of high efficiency.56 terminations are contained in FIFO means.These are the 56 pins for operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.Normally, 3.3V power supplies are owned by the component.The FIFO memory IC's maximum supply voltage is set to 3.6V .To ensure normal operation, the supply voltage should be greater than 3.3V (Vsup).The FIFO memory IC's clock runs at a frequency of 40MHz .
SN74ALVC7804-25DLR Features
9K 512 x 18 memory size
74ALVC series
Best part number of 74ALVC7804
FIFOs category
Clock frequency of 40MHz
SN74ALVC7804-25DLR Applications
There are a lot of Texas Instruments SN74ALVC7804-25DLR FIFOs Memory applications.
- Optical memories
- Buses
- Thermal Management for DDR3 Memory Modules
- Communications
- Programmable Logic Controller
- Game Consoles
- Microprogramming
- Multi-stage synchronizer
- Measurement Equipment
- Extended product life cycle
