SN74ALVC7804-40DL
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 25MHz |
| Base Part Number | 74ALVC7804 |
| Function | Asynchronous |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Circuits | 2 |
| Memory Size | 9K 512 x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 40μA |
| Max Supply Current | 40μA |
| Access Time | 20ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Density | 9 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Cycle Time | 40 ns |
| Height | 2.59mm |
| Length | 18.41mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
SN74ALVC7804-40DL Overview
The 56-BSSOP (0.295, 7.50mm Width) package contains FIFO memory chip.This FIFO memory chip is packaged as a Tube .A memory of 9K 512 x 18 is available for storing applications and data on this FIFO chip.The temperature should be adjusted to 0°C~70°C in order to ensure reliable operation.The mounting type of the FIFO memory is Surface Mount .This FIFO products operates at 3V~3.6V volts.The 74ALVC series contains this memory logic.Surface Mount is memory IC's recommended mounting method.The 74ALVC7804 family of objects contains it.A supply voltage of 3.3V allows for high efficiency.In FIFO means, there are 56 terminations.56 pins are the operation pins.The maximum current required for its operation is 40μA .A voltage of 3.3V should be used for FIFO's maximum efficiency.There is a self-contained gadget within FIFOs .This part has a memory type of OTHER FIFO .With a frequency of 25MHz , it exhibits good accuracy.The FIFO memory IC's maximum supply voltage is set to 3.6V .With the use of 2 circuits, FIFO memory chip provides enhanced flexibility.
SN74ALVC7804-40DL Features
9K 512 x 18 memory size
74ALVC series
Best part number of 74ALVC7804
FIFOs category
SN74ALVC7804-40DL Applications
There are a lot of Texas Instruments SN74ALVC7804-40DL FIFOs Memory applications.
- Networking
- Rate buffers
- SPI Bus Flash Memory Devices
- Disk Controllers
- Game Controller
- High-speed graphics pixel buffer
- Video
- Data-acquisition systems
- Medical Monitoring Device
- Buses
