SN74ALVC7804-40DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ALVC7804 |
| Function | Asynchronous |
| Current - Supply (Max) | 40μA |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3.3V |
| Memory Size | 9K 512 x 18 |
| Clock Frequency | 25MHz |
| Access Time | 20ns |
| Data Rate | 25MHz |
| Organization | 512X18 |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Cycle Time | 40 ns |
| Height Seated (Max) | 2.79mm |
| Length | 18.415mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ALVC7804-40DLR Overview
The 56-BSSOP (0.295, 7.50mm Width) package contains FIFO memory chip.There is a case Tape & Reel (TR) in which it is packaged.There is a 9K 512 x 18 MB memory on the FIFO chips, which can be used to store both applications and data.A temperature regulation of 0°C~70°C is crucial for reliable operation.A mounting type of Surface Mount is associated with the FIFO memory.A supply voltage of 3V~3.6V is required for its operation.The 74ALVC series contains this memory logic.Memory IC's maximum operating supply current is 40μA .The recommended mounting way is Surface Mount .A member of the 74ALVC7804 family, it has the following characteristics.When the supply voltage is 3.3V there is the possibility of high efficiency.A total of 56 terminations can be found in FIFO means.FIFO design has 56 operation pins.In FIFOs , there is a self-contained gadget.ICs of type OTHER FIFO are used in the FIFO memory chip.It is normal for a component to be equipped with 3.3V power supplies.There is a FIFO memory IC's maximum supply voltage of 3.6V .Maintain the supply voltage (Vsup) above 3.3V for normal operation.FIFO memory ICs run at a frequency of 25MHz .
SN74ALVC7804-40DLR Features
9K 512 x 18 memory size
74ALVC series
Best part number of 74ALVC7804
FIFOs category
Clock frequency of 25MHz
SN74ALVC7804-40DLR Applications
There are a lot of Texas Instruments SN74ALVC7804-40DLR FIFOs Memory applications.
- Consumer
- Data communications
- TVs
- Extended product-change notification
- Analog-to-digital converters
- Cardiac Monitoring Device
- Test Equipment
- Battery Charger
- Multimedia
- Computers
