banner_page

SN74ALVC7805-40DL

56 Terminations3.3V 56 Pin 74ALVC7805 FIFO memory IC74ALVC Series 4.5K 256 x 1820ns


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALVC7805-40DL
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 946
  • Description: 56 Terminations3.3V 56 Pin 74ALVC7805 FIFO memory IC74ALVC Series 4.5K 256 x 1820ns (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Weight 694.790113mg
Operating Temperature 0°C~70°C
Packaging Tube
Series 74ALVC
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FIFOs
Technology CMOS
Voltage - Supply 3V~3.6V
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.635mm
Frequency 25MHz
Base Part Number 74ALVC7805
Function Synchronous
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 2
Memory Size 4.5K 256 x 18
Element Configuration Dual
Nominal Supply Current 40μA
Max Supply Current 40μA
Access Time 20ns
Data Bus Width 18b
Direction Unidirectional
Output Characteristics 3-STATE
Memory Width 18
Density 4.5 kb
Parallel/Serial PARALLEL
Word Size 18b
Memory IC Type OTHER FIFO
Bus Directional Uni-Directional
Retransmit Capability No
Programmable Flags Support Yes
Output Enable YES
Expansion Type Width
Cycle Time 40 ns
Length 18.415mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ALVC7805-40DL Overview


The 56-BSSOP (0.295, 7.50mm Width) package contains FIFO memory chip.It comes in a Tube package.Data and applications can be stored in the FIFO chip's 4.5K 256 x 18 memory.It is recommended that the temperature be kept at 0°C~70°C to ensure reliable operation.This FIFO memory has a mounting type of Surface Mount .A 3V~3.6V supply voltage is required to power it.The 74ALVC series contains this memory logic.Surface Mount is recommended as the mounting method.Memory IC is a member of the 74ALVC7805 family.When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains a total of 56 terminations.As far as the operation pins are concerned, they are 56 pins.In order to operate FIFO design, a maximum current of 40μA is required.In order to maximize efficiency, the supply voltage should be set to 3.3V .A self-contained gadget is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.A frequency of 25MHz is sufficient to maintain good accuracy.A FIFO memory IC's maximum supply voltage of 3.6V is set for Vsup.Keeping the supply voltage (Vsup) above 3V is essential for normal operation.With 2 circuits, FIFO memory chip offers enhanced flexibility.

SN74ALVC7805-40DL Features


4.5K 256 x 18 memory size
74ALVC series
Best part number of 74ALVC7805
FIFOs category

SN74ALVC7805-40DL Applications


There are a lot of Texas Instruments SN74ALVC7805-40DL FIFOs Memory applications.

  • Multi-stage synchronizer
  • Character generators
  • Medical Monitoring Device
  • Magnetic memories
  • Thermal Management for DDR3 Memory Modules
  • Microprogramming
  • Queues for communication systems
  • High-speed disk
  • Multimedia
  • Communications Systems

Write a review

Note: HTML is not translated!
    Bad           Good