SN74ALVC7806-25DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 40MHz |
| Base Part Number | 74ALVC7806 |
| Function | Asynchronous |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Memory Size | 4.5K 256 x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 40μA |
| Max Supply Current | 40μA |
| Access Time | 18ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Density | 4.5 kb |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVC7806-25DL Overview
56-BSSOP (0.295, 7.50mm Width) is the package in which FIFO memory chip is contained.There's a Tube on the package.In addition, the FIFO chip has a memory capacity of 4.5K 256 x 18 , which can be used to store applications and data.To ensure reliable operation, the temperature should be regulated to 0°C~70°C .It is a Surface Mount mounting type FIFO memory.For operation, a voltage of 3V~3.6V is used.A component in the 74ALVC series, this is an memory logic.A Surface Mount mounting method is recommended.The 74ALVC7806 family contains this item.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO means contains a total of 56 terminations.56 pins are used for operation.In order to operate FIFO design, a maximum current of 40μA is required.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .It is contained within FIFOs .This part has a memory type of OTHER FIFO .It maintains good accuracy at a 40MHz frequency.In this case, the FIFO memory IC's maximum supply voltage is set to 3.6V .To ensure normal operation, the supply voltage should be greater than 3V (Vsup).By using 2 circuitry, FIFO memory chip has enhanced flexibility.
SN74ALVC7806-25DL Features
4.5K 256 x 18 memory size
74ALVC series
Best part number of 74ALVC7806
FIFOs category
SN74ALVC7806-25DL Applications
There are a lot of Texas Instruments SN74ALVC7806-25DL FIFOs Memory applications.
- Alarm System
- Networking
- Consumer
- SPI Bus Flash Memory Device
- Consumer Systems
- IP Radio
- Fabrication Site
- Computers
- High-speed graphics pixel buffer
- Telecommunication
