banner_page

SN74ALVC7806-25DLR

56 Terminations56 Pin 74ALVC7806 FIFO memory IC74ALVC Series 4.5K 256 x 1818ns


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALVC7806-25DLR
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 216
  • Description: 56 Terminations56 Pin 74ALVC7806 FIFO memory IC74ALVC Series 4.5K 256 x 1818ns (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Series 74ALVC
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
ECCN Code EAR99
HTS Code 8542.32.00.71
Subcategory FIFOs
Technology CMOS
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 3.3V
Terminal Pitch 0.635mm
Base Part Number 74ALVC7806
Function Asynchronous
Current - Supply (Max) 40μA
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 3V
Memory Size 4.5K 256 x 18
Clock Frequency 40MHz
Access Time 18ns
Data Rate 40MHz
Output Characteristics 3-STATE
Memory Width 18
Memory Density 4608 bit
Parallel/Serial PARALLEL
Memory IC Type OTHER FIFO
Bus Directional Uni-Directional
Retransmit Capability No
Programmable Flags Support Yes
Output Enable YES
Expansion Type Width
Cycle Time 25 ns
Height Seated (Max) 2.79mm
Length 18.415mm
Width 7.5mm
RoHS Status ROHS3 Compliant

SN74ALVC7806-25DLR Overview


FIFO memory chip is included in the 56-BSSOP (0.295, 7.50mm Width) package.There's a Tape & Reel (TR) on the package.It is possible to store data and applications on the FIFO chips as they have 4.5K 256 x 18 in their memory.It is recommended that the temperature be kept at 0°C~70°C to ensure reliable operation.Surface Mount is the mounting type of the FIFO memory.For operation, a voltage of 3V~3.6V is used.The 74ALVC series is represented by this memory logic.As far as operating current is concerned, it has a maximum of 40μA .Mounting it in Surface Mount is recommended.I believe it belongs to the 74ALVC7806 family of numbers.When the supply voltage is 3.3V , high efficiency is possible.56 terminations are contained in FIFO means.There are 56 pins for operation.FIFOs contains this gadget in its entirety.ICs of type OTHER FIFO are used in the FIFO memory chip.There are normally 3.3V power supplies attached to the component.A FIFO memory IC's maximum supply voltage of 3.6V is set for Vsup.Keeping the supply voltage (Vsup) above 3V is essential for normal operation.The FIFO memory IC's clock runs at a frequency of 40MHz .

SN74ALVC7806-25DLR Features


4.5K 256 x 18 memory size
74ALVC series
Best part number of 74ALVC7806
FIFOs category
Clock frequency of 40MHz

SN74ALVC7806-25DLR Applications


There are a lot of Texas Instruments SN74ALVC7806-25DLR FIFOs Memory applications.

  • TVs
  • Video
  • Buses
  • Firmware loaders
  • Alarm System
  • Video Processing
  • Emulators
  • Character generators
  • Tape controllers
  • Laser Receiver System

Write a review

Note: HTML is not translated!
    Bad           Good