SN74ALVC7813-20DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALVC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ALVC7813 |
| Function | Synchronous |
| Current - Supply (Max) | 40μA |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Memory Size | 1.125K 64 x 18 |
| Clock Frequency | 50MHz |
| Access Time | 13ns |
| Data Rate | 50MHz |
| Organization | 64X18 |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Memory Density | 1152 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Cycle Time | 20 ns |
| Height Seated (Max) | 2.79mm |
| Length | 18.415mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVC7813-20DLR Overview
You can find FIFO memory chip in the 56-BSSOP (0.295, 7.50mm Width) package.Cut Tape (CT) case is used for packaging.The FIFO chips have a memory of 1.125K 64 x 18 that can be used to store applications and data.The temperature should be kept at 0°C~70°C to ensure reliable operation.The mounting type of the FIFO memory is Surface Mount .Operating voltage is 3V~3.6V .It is a member of the 74ALVC series .40μA is memory IC's maximum operating supply current.Surface Mount is recommended as the mounting method.Memory IC is a member of the 74ALVC7813 family.Supply voltages of 3.3V are capable of achieving high efficiency.FIFO means contains 56 terminations.56 pin is used for operation.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.There are normally 3.3V power supplies attached to the component.The FIFO memory IC's maximum supply voltage is set to 3.6V .For normal operation, keep the supply voltage (Vsup) above 3V .A clock on the FIFO memory IC runs at a frequency of 50MHz .
SN74ALVC7813-20DLR Features
1.125K 64 x 18 memory size
74ALVC series
Best part number of 74ALVC7813
FIFOs category
Clock frequency of 50MHz
SN74ALVC7813-20DLR Applications
There are a lot of Texas Instruments SN74ALVC7813-20DLR FIFOs Memory applications.
- Video time base correction
- High-speed graphics pixel buffer
- Digital buffering
- Transistors
- Video Processing
- Application that requires re-writable nonvolatile parameter memory
- Laser Receiver System
- Communications
- Portable Information Devices
- Network bridges
