Parameters |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
74ALVC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FIFOs |
Technology |
CMOS |
Voltage - Supply |
3V~3.6V |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.635mm |
Frequency |
40MHz |
Base Part Number |
74ALVC7813 |
Function |
Synchronous |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
2 |
Memory Size |
1.125K 64 x 18 |
Element Configuration |
Dual |
Nominal Supply Current |
40μA |
Max Supply Current |
40μA |
Access Time |
15ns |
Data Bus Width |
18b |
Direction |
Unidirectional |
Output Characteristics |
3-STATE |
Density |
1.1 kb |
Parallel/Serial |
PARALLEL |
Word Size |
18b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Uni-Directional |
Retransmit Capability |
No |
Programmable Flags Support |
Yes |
Output Enable |
YES |
Expansion Type |
Width |
Height |
2.59mm |
Length |
18.54mm |
Width |
7.59mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
SN74ALVC7813-25DL Overview
FIFO memory chip is contained in the 56-BSSOP (0.295, 7.50mm Width) package.In this case, it is packaged in case number Tube .The FIFO chips have a memory of 1.125K 64 x 18 that can be used to store applications and data.To ensure reliable operation, the temperature should be regulated to 0°C~70°C .Mounting type Surface Mount indicates that the FIFO memory is mounted.Powered by a voltage of 3V~3.6V , it operates on a low supply voltage.The 74ALVC series comprises this memory logic.A Surface Mount mounting method is recommended.Memory IC is a member of the 74ALVC7813 family.If the supply voltage is set to 3.3V , high efficiency can be achieved.56 terminations are contained in FIFO means.There are 56 pins for operation.There is a maximum current requirement of 40μA for its operation.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.There is a self-contained gadget within FIFOs .In this part, the memory type is OTHER FIFO .When the frequency is set to 40MHz it can maintain good accuracy.It is set to 3.6V volts for the FIFO memory IC's maximum supply voltage.To ensure normal operation, make sure the supply voltage (Vsup) is above 3V .By using 2 circuits, FIFO memory chip achieves enhanced flexibility.
SN74ALVC7813-25DL Features
1.125K 64 x 18 memory size
74ALVC series
Best part number of 74ALVC7813
FIFOs category
SN74ALVC7813-25DL Applications
There are a lot of Texas Instruments SN74ALVC7813-25DL FIFOs Memory applications.
- Character generators
- Routers
- One assembly
- SPI Bus Flash Memory Devices
- SPI Bus Flash Memory Device
- Buses
- Signal processing
- Wireless
- Down-Hole Energy Drilling
- IP Radio