banner_page

SN74ALVC7813-25DLR

56 TerminationsFIFO memory IC74ALVC Series 1.125K 64 x 1815ns


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-SN74ALVC7813-25DLR
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 885
  • Description: 56 TerminationsFIFO memory IC74ALVC Series 1.125K 64 x 1815ns (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Surface Mount YES
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Series 74ALVC
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 56
Terminal Finish NICKEL PALLADIUM GOLD
Technology CMOS
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.635mm
JESD-30 Code R-PDSO-G56
Function Synchronous
Current - Supply (Max) 40μA
Qualification Status COMMERCIAL
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Memory Size 1.125K 64 x 18
Access Time 15ns
Data Rate 40MHz
Organization 64X18
Memory Width 18
Memory Density 1152 bit
Parallel/Serial PARALLEL
Bus Directional Uni-Directional
Retransmit Capability No
Programmable Flags Support Yes
Output Enable YES
Expansion Type Width
Cycle Time 25 ns
Height Seated (Max) 2.79mm
Length 18.415mm
Width 7.5mm
RoHS Status ROHS3 Compliant

SN74ALVC7813-25DLR Overview


FIFO memory chip is contained in the 56-BSSOP (0.295, 7.50mm Width) package.In terms of packaging, it comes in Tape & Reel (TR) cases.Data and applications can be stored in the FIFO chip's 1.125K 64 x 18 memory.The temperature should be kept at 0°C~70°C to ensure reliable operation.It is a Surface Mount mounting type FIFO memory.To operate, the FIFO products requires a voltage supply of 3V~3.6V .A component in the 74ALVC series, this is an memory logic.A maximum operating supply current of 40μA is provided by this FIFO products.A supply voltage of 3.3V is capable of producing high efficiency.A total of 56 terminations can be found in FIFO means.Vsup is set to 3.6V (FIFO memory IC's maximum supply voltage).Keeping the supply voltage (Vsup) above 3V is essential for normal operation.

SN74ALVC7813-25DLR Features


1.125K 64 x 18 memory size
74ALVC series

SN74ALVC7813-25DLR Applications


There are a lot of Rochester Electronics, LLC SN74ALVC7813-25DLR FIFOs Memory applications.

  • Video time base correction
  • Analog-to-digital converters
  • Code converters
  • Microprogramming
  • Video
  • General Data Collection Applications at Low-Temperatures
  • IP Radio
  • Game Consoles
  • GPS Offender Tracking
  • Signal processing

Write a review

Note: HTML is not translated!
    Bad           Good