SN74ALVC7814-25DL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALVC |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ALVC7814 |
| JESD-30 Code | R-PDSO-G56 |
| Function | Asynchronous |
| Current - Supply (Max) | 40μA |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Memory Size | 1.125K 64 x 18 |
| Clock Frequency | 40MHz |
| Access Time | 18ns |
| Data Rate | 40MHz |
| Organization | 64X18 |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Memory Density | 1152 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Cycle Time | 25 ns |
| Height Seated (Max) | 2.79mm |
| Length | 18.415mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ALVC7814-25DL Overview
FIFO memory chip is included in the 56-BSSOP (0.295, 7.50mm Width) package.The package comes in a case of Tube .There is a memory of 1.125K 64 x 18 on the FIFO chip that can be used to store applications and data.Regulating the temperature to 0°C~70°C ensures reliable operation.A mounting type of Surface Mount is associated with the FIFO memory.A supply voltage of 3V~3.6V is required for its operation.It is a component from the 74ALVC series.A maximum operating supply current of 40μA is provided by this FIFO products.In addition, it is among the members of the 74ALVC7814 family.A supply voltage of 3.3V allows for high efficiency.The number of terminations in FIFO means is 56 .In FIFOs , there is a self-contained gadget.This part has a memory type of OTHER FIFO .There are normally 3.3V power supplies attached to the component.A FIFO memory IC's maximum supply voltage of 3.6V is set for Vsup.Maintain the supply voltage (Vsup) above 3V for normal operation.This FIFO memory IC operates at a frequency of 40MHz .
SN74ALVC7814-25DL Features
1.125K 64 x 18 memory size
74ALVC series
Best part number of 74ALVC7814
FIFOs category
Clock frequency of 40MHz
SN74ALVC7814-25DL Applications
There are a lot of Texas Instruments SN74ALVC7814-25DL FIFOs Memory applications.
- High-speed disk
- TVs
- Event Recorder
- Signal processing
- Portable Information Devices
- Networking
- Address mapping
- MP3 Interface for Automobile
- Microprogramming
- High-speed graphics pixel buffer
