SN74ALVC7814-25DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVC |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ALVC7814 |
| Function | Asynchronous |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Memory Size | 1.125K 64 x 18 |
| Element Configuration | Dual |
| Max Supply Current | 40μA |
| Clock Frequency | 40MHz |
| Access Time | 18ns |
| Data Rate | 40MHz |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Organization | 64X18 |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Density | 1.1 kb |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Length | 18.415mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ALVC7814-25DLR Overview
You can find FIFO memory chip in the 56-BSSOP (0.295, 7.50mm Width) package.In terms of packaging, it comes in Tape & Reel (TR) cases.A memory of 1.125K 64 x 18 is available for storing applications and data on this FIFO chip.It is recommended that the temperature of the system be regulated to 0°C~70°C for reliable operation.There is Surface Mount mounting type for this FIFO memory.For operation, it requires a supply voltage of 3V~3.6V .The 74ALVC series contains this memory logic.It is recommended that memory IC be mounted in the Surface Mount direction.This object belongs to the family 74ALVC7814 .When the supply voltage is 3.3V , high efficiency is possible.A total of 56 terminations can be found in FIFO means.The operation pins are 56 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 40μA .A voltage of 3.3V should be used for FIFO's maximum efficiency.This gadget is self-contained in?FIFOs .It has a OTHER FIFO memory type IC.In this case, the FIFO memory IC's maximum supply voltage is set to 3.6V .As a general rule, keep the supply voltage (Vsup) above 3V in order to ensure normal operation.A clock running at frequency 40MHz is used by the FIFO memory IC.With 2 circuits, FIFO memory chip offers enhanced flexibility.
SN74ALVC7814-25DLR Features
1.125K 64 x 18 memory size
74ALVC series
Best part number of 74ALVC7814
FIFOs category
Clock frequency of 40MHz
SN74ALVC7814-25DLR Applications
There are a lot of Texas Instruments SN74ALVC7814-25DLR FIFOs Memory applications.
- Magnetic memories
- Rate buffers
- Thermal Management for DDR3 Memory Modules
- High-speed disk
- Video time base correction
- Programmable Logic Controller
- TVs
- Computers
- Temporary storage elements
- Fabrication Site
