banner_page

SN74ALVC7814-40DLR

56 Terminations56 Pin 74ALVC7814 FIFO memory IC74ALVC Series 1.125K 64 x 1820ns


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALVC7814-40DLR
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 232
  • Description: 56 Terminations56 Pin 74ALVC7814 FIFO memory IC74ALVC Series 1.125K 64 x 1820ns (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Series 74ALVC
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
ECCN Code EAR99
HTS Code 8542.32.00.71
Subcategory FIFOs
Technology CMOS
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 3.3V
Terminal Pitch 0.635mm
Base Part Number 74ALVC7814
Function Asynchronous
Current - Supply (Max) 40μA
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 3V
Memory Size 1.125K 64 x 18
Clock Frequency 25MHz
Access Time 20ns
Data Rate 25MHz
Organization 64X18
Output Characteristics 3-STATE
Memory Width 18
Memory Density 1152 bit
Parallel/Serial PARALLEL
Memory IC Type OTHER FIFO
Bus Directional Uni-Directional
Retransmit Capability No
Programmable Flags Support Yes
Output Enable YES
Expansion Type Width
Cycle Time 40 ns
Height Seated (Max) 2.79mm
Length 18.415mm
Width 7.5mm
RoHS Status ROHS3 Compliant

SN74ALVC7814-40DLR Overview


FIFO memory chip is included in the 56-BSSOP (0.295, 7.50mm Width) package.This FIFO memory chip is packaged as a Tape & Reel (TR) .It is possible to store data and applications on the FIFO chips as they have 1.125K 64 x 18 in their memory.Regulating the temperature to 0°C~70°C ensures reliable operation.This FIFO memory has a mounting type of Surface Mount .It uses a supply voltage of 3V~3.6V to operate.The 74ALVC series is represented by this memory logic.40μA is memory IC's maximum operating supply current.It is recommended that memory IC be mounted in the Surface Mount direction.The 74ALVC7814 family of objects contains it.When the supply voltage is 3.3V , high efficiency is possible.I found that it has 56 terminations in FIFO means.FIFO design has 56 operation pins.In FIFOs , this gadget is self-contained.There is a memory type OTHER FIFO in the IC of this part.A component normally has 3.3V power supplies attached to it.The FIFO memory IC's maximum supply voltage is set to 3.6V .To ensure normal operation, make sure the supply voltage (Vsup) is above 3V .The FIFO memory IC runs at a frequency of 25MHz .

SN74ALVC7814-40DLR Features


1.125K 64 x 18 memory size
74ALVC series
Best part number of 74ALVC7814
FIFOs category
Clock frequency of 25MHz

SN74ALVC7814-40DLR Applications


There are a lot of Texas Instruments SN74ALVC7814-40DLR FIFOs Memory applications.

  • Character generators
  • GPS Offender Tracking
  • Disk Controllers
  • Medical Monitoring Device
  • Fabrication Site
  • Temporary storage elements
  • IP Radio
  • Firmware loaders
  • Video time base correction
  • Consumer

Write a review

Note: HTML is not translated!
    Bad           Good