SN74ALVCF162834DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ALVCF |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCF162834 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Max Output Current | 18mA |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Channels | 18 |
| Number of Circuits | 18-Bit |
| Operating Supply Current | 100nA |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 18mA |
| Max Supply Current | 40μA |
| Number of Bits | 18 |
| Propagation Delay | 5.6 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 6 ns |
| Family | ALVC/VCX/A |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 18mA 18mA |
| Logic Type | Universal Bus Driver, CMOS |
| Prop. Delay@Nom-Sup | 3.5 ns |
| Trigger Type | POSITIVE EDGE |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVCF162834DL Overview
There is an embedded version of it in the 56-BSSOP (0.295, 7.50mm Width) package. It is packaged in a way that resembles Tube. In order to achieve the high level of flexibility that it possesses, 18-Bit circuits are used. This electrical device has a logic type of Universal Bus Driver, CMOS, which means that it is a logic device. Surface Mount is pointing towards the electronic part. As far as the operating temperature is concerned, it should be higher than -40°C~85°C. In addition, 18mA 18mA features the highest level of flexibility in its design due to its high and low output currents. The 74ALVCF series contains this type of FPGA. The supply voltage is 2.3V~3.6V. As it belongs to the 74ALVCF162834 family, it should be taken into consideration. In 56 terminations, a transmission line is terminated with an impedance-matched device. For normal operation, the supply voltage must be kept above 2.5V in order for the device to function properly. 56 pins are present in the device. In order to design this electronic part, 18 Bits have been used. The 2 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. In this case, the electronic part is mounted in the direction of Surface Mount. 56 pins are used in its design. The ALVC/VCX/A family is made up of a number of electronic devices, one of which is this device, that belong to the genre of electronic devices. Upon reaching 3.6V, Vsup reaches its maximal value. There should be a greater supply voltage (Vsup) than 2.3V. Power is provided by 3.3V power supplies. 1 elements make up the structure. The trigger it is configured with uses POSITIVE EDGE. As a result of its output current, 18mA is able to offer maximum design flexibility. In Bus Driver/Transceivers, there is this part. Channels are growing strong/weak: 18. It is in this case that 100nA of quiescent current is consumed without being affected by external factors in any way. When the maximal current supplied for the motor's operation reaches 40μA, it is considered to be operational.
SN74ALVCF162834DL Features
56-BSSOP (0.295, 7.50mm Width) package
74ALVCF series
74ALVCF162834 family
56 pin count
56 pins
3.3V power supplies
1 elements
SN74ALVCF162834DL Applications
There are a lot of Texas Instruments SN74ALVCF162834DL Universal Bus Functions applications.
- Wearable Health and Fitness Devices
- Remote monitoring
- Photovoltaic system
- Overvoltage and undervoltage protection
- Light-activated burglar alarm
- Street lights
- Industrial plant
- Safety thermostat
- Freezer warning buzzer circuits
- Digital stopwatches
