SN74ALVCH162260GR
| Parameters | |
|---|---|
| Current - Output High, Low | 12mA 12mA |
| Logic Type | D-Type, Addressable |
| Prop. Delay@Nom-Sup | 5.9 ns |
| Power Supply Current-Max (ICC) | 0.04mA |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ALVCH162260 |
| Pin Count | 56 |
| Number of Outputs | 24 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 12:24 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 12 |
| Throw Configuration | SPDT |
| Propagation Delay | 7.2 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
SN74ALVCH162260GR Overview
In the 56-TFSOP (0.240, 6.10mm Width) package, it can be found as an embedded module. The package is in the form of Cut Tape (CT). In this configuration, the output is set to Tri-State. This electrical device has Logic type D-Type, Addressable. The way in which this electronic part is mounted is Surface Mount. There is no supply voltage for this device. A temperature of -40°C~85°C is used for operation. In the 74ALVCH series, this FPGA is located. The design of this electronic part contains 12 bits. A device with this design has 56 terminations. This type belongs to the 74ALVCH162260 family. A 1.8V voltage supply is required for operation. It is equipped with 56 pin count. ALVC/VCX/A is the family of this electronic device. With the design of the board, there are only 56 pins. Mounting this electronic component follows the Surface Mount method. Subcategory Other Logic ICs includes this part. The maximal supply voltage (Vsup) reaches 3.6V. The system is powered by 3.3V sources. Based on its reliable performance, this device is well suited to TR. It features maximum flexibility in design due to 24mA output current. It consumes 40μA of quiescent current without being affected by external factors. In total, it has 1 elements. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA.
SN74ALVCH162260GR Features
56-TFSOP (0.240, 6.10mm Width) package
74ALVCH series
12 Bits
74ALVCH162260 family
56 pin count
56 pins
3.3V power supplies
1 elements
SN74ALVCH162260GR Applications
There are a lot of Texas Instruments SN74ALVCH162260GR Latches applications.
- Address register
- Automotive Cluster
- PCs and Notebooks
- Flip-flops
- Automotive ADAS
- Pattern Generators
- Phase comparator
- A/D converters
- Shift right register
- Four-bit storage with output enable
