SN74ALVCH162373DL
| Parameters | |
|---|---|
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 16 |
| Propagation Delay | 6.6 ns |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 4 ns |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.635mm |
| Frequency | 10MHz |
| Base Part Number | 74ALVCH162373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
SN74ALVCH162373DL Overview
The package in which it is embedded is named 48-BSSOP (0.295, 7.50mm Width). As a result, it has a packaging of Tube. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. The way in which this electronic part is mounted is Surface Mount. A 1.65V~3.6V supply voltage is required to operate it. There is -40°C~85°C operating temperature. The 74ALVCH series is associated with this FPGA. There are 16 bits in this electronic part. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74ALVCH162373. With a supply voltage of 1.8V, it operates. There are 48 pins on it. In terms of electronic devices, this one is in the ALVC/VCX/A family. The 48 pins are designed into it. Surface Mount is used to mount this electronic part. This device has 2 ports that can be connected to it. FF/Latches is the subcategory of this part. 3.6V is the maximum supply voltage (Vsup). The system is powered by 3.3V sources. Ensure that the supply voltage (Vsup) is greater than 1.65V. Its output current of 12mA ensures maximum design flexibility. There are 16 output lines that correspond to the binary equivalents of the input line. It consists of 2 elements. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.
SN74ALVCH162373DL Features
48-BSSOP (0.295, 7.50mm Width) package
74ALVCH series
16 Bits
74ALVCH162373 family
48 pin count
48 pins
3.3V power supplies
2 elements
SN74ALVCH162373DL Applications
There are a lot of Texas Instruments SN74ALVCH162373DL Latches applications.
- Up/down difference counting
- Timers
- Stacked or Push-Down Registers
- Parallel Output
- Avionics
- Counting
- Accumulator Registers
- Four-bit storage with output enable
- Digital bus buffer
- Flip-flops
