SN74ALVCH162373LR
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ALVCH162373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.6 ns |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 4 ns |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
SN74ALVCH162373LR Overview
In the 48-BSSOP (0.295, 7.50mm Width) package, it can be found as an embedded module. It is packaged in the way of Tape & Reel (TR). It is configured with an output of Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. The voltage supply is 1.65V~3.6V. During operation, the temperature is set at -40°C~85°C. The 74ALVCH series is associated with this FPGA. This electronic part is designed with 16 Bits. In this device, there are 48 terminations. It is a member of the 74ALVCH162373 family. The device works with a voltage of 1.8V for its supply voltage. It is equipped with 48 pin count. ALVC/VCX/A is the family of this electronic device. The 48 pins are designed into it. The electronic part is mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to the subcategory of FF/Latches. It reaches a maximum supply voltage (Vsup) of 3.6V. The system is powered by 3.3V sources. There should be a voltage supply (Vsup) greater than 1.65V. On the basis of its reliability, this device is well suited for TR. There are 16 output lines that correspond to the binary equivalents of the input line. This object is composed of 2 elements. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA.
SN74ALVCH162373LR Features
48-BSSOP (0.295, 7.50mm Width) package
74ALVCH series
16 Bits
74ALVCH162373 family
48 pin count
48 pins
3.3V power supplies
2 elements
SN74ALVCH162373LR Applications
There are a lot of Texas Instruments SN74ALVCH162373LR Latches applications.
- Timers
- Phase comparator
- Control circuits
- Serial Output Register
- Counter timers
- Counting
- BCD counting
- Data acquisition
- Parallel Output
- Synchronous frequency dividers
