SN74ALVCH162374DLR
| Parameters | |
|---|---|
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74ALVCH162374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 5.4 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 6.5 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.6ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.6 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
SN74ALVCH162374DLR Overview
48-BSSOP (0.295, 7.50mm Width)is the packaging method. D flip flop is included in the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. The supply voltage is set to 1.65V~3.6V. In this case, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74ALVCHseries of FPGAs. It should not exceed 150MHzin its output frequency. A total of 2elements are contained within it. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74ALVCH162374. The D flip flop is powered by a voltage of 1.8V . Its input capacitance is 3pF farads. Electronic devices of this type belong to the ALVC/VCX/Afamily. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 48 pins. This device has Positive Edgeas its clock edge trigger type. This device has the base part number FF/Latches. This flip flop is designed with 16 Bits. Normal operation requires a supply voltage (Vsup) above 1.65V. This D flip flop is well suited for TR based on its reliable performance. There are 2 ports embedded in the flip flops. It offers maximum design flexibility with its output current of 12mA. There are no output lines on the JK flip flop. It consumes 40μA of quiescent current without being affected by external factors.
SN74ALVCH162374DLR Features
Tape & Reel (TR) package
74ALVCH series
48 pins
16 Bits
SN74ALVCH162374DLR Applications
There are a lot of Texas Instruments SN74ALVCH162374DLR Flip Flops applications.
- Single Down Count-Control Line
- Computers
- Buffered Clock
- Convert a momentary switch to a toggle switch
- Synchronous counter
- Divide a clock signal by 2 or 4
- Pattern generators
- Cold spare funcion
- Matched Rise and Fall
- ATE
