banner_page

SN74ALVCH16260DL

D-Type, Latch 1.65V~3.6V 12 Bits Tri-State Latches 74ALVCH Series 74ALVCH16260 56 Pins DUAL CMOS 56-BSSOP (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALVCH16260DL
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 565
  • Description: D-Type, Latch 1.65V~3.6V 12 Bits Tri-State Latches 74ALVCH Series 74ALVCH16260 56 Pins DUAL CMOS 56-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Weight 694.790113mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ALVCH
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Other Logic ICs
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 12
Supply Voltage 1.8V
Base Part Number 74ALVCH16260
Pin Count 56
Number of Outputs 24
Output Type Tri-State
Number of Elements 1
Circuit 12:24
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Output Current 24mA
Number of Bits 12
Propagation Delay 4.3 ns
Turn On Delay Time 1 ns
Family ALVC/VCX/A
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type, Addressable
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 5
Number of Output Lines 2
Height 2.79mm
Length 18.41mm
Width 7.49mm
Thickness 2.59mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ALVCH16260DL Overview


Package 56-BSSOP (0.295, 7.50mm Width) includes it. The package is in the form of Tube. It uses the output configuration Tri-State. In this electrical device, the logic type is D-Type, Addressable. Mounting this electronic component follows the Surface Mount method. It operates at a voltage of 1.65V~3.6V. There is -40°C~85°C operating temperature. 74ALVCH is the series number of this FPGA. There are 12 bits in this electronic part. A device such as this has 56 terminations designed. The family in which it belongs to is 74ALVCH16260. The supply voltage of the device is 1.8V. There are 56 pins attached to it. It is a member of the ALVC/VCX/A family of electronic devices. 56 pins are used in its design. It is mounted according to the Surface Mount method. The part is in the Other Logic ICs subcategory. The maximal supply voltage (Vsup) reaches 3.6V. A total of 3.3V power supplies are needed to run it. Electronic circuits are represented by 5 input lines. As the output current is 24mA, the design flexibility is maximum. There are 2 output lines that correspond to the binary equivalents of the input line. This object is composed of 1 elements. When the maximum power current (ICC) is supplied for its operation, it reaches 0.04mA.

SN74ALVCH16260DL Features


56-BSSOP (0.295, 7.50mm Width) package
74ALVCH series
12 Bits
74ALVCH16260 family
56 pin count
56 pins
3.3V power supplies
1 elements

SN74ALVCH16260DL Applications


There are a lot of Texas Instruments SN74ALVCH16260DL Latches applications.

  • Synchronous frequency dividers
  • Watches
  • Automatic test equipment
  • Relay replacement
  • Communication systems
  • Stacked or Push-Down Registers
  • Data acquisition
  • High-speed logic
  • Parallel data storage
  • Bus system register with enable parallel lines at bus side

Write a review

Note: HTML is not translated!
    Bad           Good