SN74ALVCH16269KR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.796911mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALVCH |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ALVCH16269 |
| Pin Count | 56 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Circuits | 12 ~ 24-Bit |
| Number of Ports | 3 |
| Nominal Supply Current | 250mA |
| Number of Bits | 12 |
| Propagation Delay | 6.2 ns |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Registered Bus Exchanger |
| Output Polarity | TRUE |
| Number of Input Lines | 12 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ALVCH16269KR Overview
56-VFBGA contains this file. The package is packaged in the way that Cut Tape (CT) would package it. A 12 ~ 24-Bit circuit achieves its superior flexibility by using 12 ~ 24-Bit components. A Registered Bus Exchanger is the logic type of the electrical device that we are discussing. A Surface Mount-shaped electronic component is mounted here. It is better to have an operating temperature higher than -40°C~85°C. In addition, 24mA 24mA features the highest level of flexibility in its design due to its high and low output currents. An FPGA of this type belongs to the series 74ALVCH and belongs to the category of FPGAs. Using 1.65V~3.6V as a supply voltage, it operates. As it belongs to the 74ALVCH16269 family, it should be taken into consideration. It is possible to use 56 terminations, which are the ends of a transmission line which should be connected to a device whose characteristic impedance matches that of the transmission line. Normal operation requires an output voltage above 1.8V. There are a total of 96 pins on this device. Electronic parts such as this one are designed with 12 Bits. Termination with a 3 termination matches the characteristic impedance of the transmission line. This electronic part is mounted in the way of Surface Mount. A 56-pin is used for its design. The electronic device in question belongs to the ALVC/VCX/A family of electronic devices. A maximum supply voltage (Vsup) is reached at 3.6V. There should be a greater supply voltage (Vsup) than 1.65V. Powered by 3.3V batteries, it operates on a 12V system. There is a part included in Other Logic ICs that is similar to this one. The switching power supply includes 12 input lines, which consist of electronic circuits connected to the mains and rectifier input stages.
SN74ALVCH16269KR Features
56-VFBGA package
74ALVCH series
74ALVCH16269 family
56 pin count
56 pins
3.3V power supplies
SN74ALVCH16269KR Applications
There are a lot of Texas Instruments SN74ALVCH16269KR Universal Bus Functions applications.
- Wearable Health and Fitness Devices
- Fishery-optical complementary power station
- Test and Measurement
- Flip flops
- TTL (Transistor Transistor Logic) circuitry
- Remote monitoring
- Data transmission control
- Analog ICs
- Small and medium off-grid systems
- Freezer warning buzzer circuits
