SN74ALVCH162820DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74ALVCH162820 |
| Function | Standard |
| Number of Outputs | 20 |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Number of Ports | 2 |
| Output Current | 12mA |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 5.4ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 5.4 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ALVCH162820DLR Overview
The flip flop is packaged in a case of 56-BSSOP (0.295, 7.50mm Width). There is an embedded version in the package Tape & Reel (TR). It is configured with Tri-State, Non-Invertedas an output. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. A 1.65V~3.6Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74ALVCH series. In order for it to function properly, its output frequency should not exceed 150MHz. A total of 1 elements are present. During its operation, it consumes 40μA quiescent energy. 56terminations have occurred. The 74ALVCH162820 family contains this object. It is powered from a supply voltage of 1.8V. A 3.5pFfarad input capacitance is provided by this T flip flop. An electronic device belonging to the family ALVC/VCX/Acan be found here. There is an electronic component mounted in the way of Surface Mount. It is designed with 56 pins. This device has the clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. 2 circuits are used to achieve its superior flexibility. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. A total of 2ports are embedded in the D flip flop. With an output current of 12mA, it is possible to design the device in any way you want. There are no output lines on the JK flip flop.
SN74ALVCH162820DLR Features
Tape & Reel (TR) package
74ALVCH series
56 pins
SN74ALVCH162820DLR Applications
There are a lot of Texas Instruments SN74ALVCH162820DLR Flip Flops applications.
- Synchronous counter
- Reduced system switching noise
- ESD protection
- Cold spare funcion
- Guaranteed simultaneous switching noise level
- ATE
- QML qualified product
- Circuit Design
- Test & Measurement
- Balanced Propagation Delays
