Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
80-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
80 |
Weight |
265.096391mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74ALVCH |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
80 |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Voltage - Supply |
1.65V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.4mm |
Base Part Number |
74ALVCH16282 |
Pin Count |
80 |
Number of Outputs |
36 |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Number of Circuits |
18 ~ 36-Bit |
Number of Ports |
3 |
Number of Bits |
18 |
Propagation Delay |
5.3 ns |
Quiescent Current |
40μA |
Turn On Delay Time |
8.7 ns |
Family |
ALVC/VCX/A |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Logic Type |
Registered Bus Exchanger |
Number of Input Lines |
18 |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ALVCH16282DBBR Overview
The package 80-TFSOP (0.240, 6.10mm Width) includes it. Cut Tape (CT) is how it's packaged. A 18 ~ 36-Bit-circuit is used to provide its superior flexibility. This electrical device has a logic type of Registered Bus Exchanger, which means that it is a logic device. I have mounted this electronic part in the way of Surface Mount in this way. The operating temperature should be higher than -40°C~85°C. The high/low output current of 24mA 24mA enables maximum design flexibility. An FPGA belonging to the 74ALVCH series is a type of FPGA. Powered by 1.65V~3.6V, it operates on a voltage of V. As it belongs to the 74ALVCH16282 family, it should be taken into consideration. It is also possible to terminate a transmission line with a 80 termination, which is where the transmission line is closed with a device that matches the characteristic impedance of the transmission line. It is recommended that the supply voltage be kept above 1.8V for normal operation. It is equipped with 80 pin count. There is an electronic part in this product that has been designed with 18 Bits. Transmission lines can be terminated with 3 terminations by using a device that matches the characteristic impedance. The electronic part is mounted in Surface Mount-direction. A 80-pin design is used. It is a member of the ALVC/VCX/A family of electronic devices. When Vsup reaches 3.6V, the maximum supply voltage has been reached. It operates from 3.3V power supplies. A 1-element is included in it. In Other Logic ICs, this part is included. There is no external influence on how it consumes 40μA of quiescent current. 36 outputs are configured. 18 input lines consist of electronic circuits connected between the switch power supply rectifier input stage and ac mains.
SN74ALVCH16282DBBR Features
80-TFSOP (0.240, 6.10mm Width) package
74ALVCH series
74ALVCH16282 family
80 pin count
80 pins
3.3V power supplies
1 elements
36 outputs
SN74ALVCH16282DBBR Applications
There are a lot of Texas Instruments SN74ALVCH16282DBBR Universal Bus Functions applications.
- Digital watch
- Controller ICs
- MPPT function (maximum power point tracking)
- Electricity for military and civilian life in areas without electricity
- Arithmetic unit
- VCD
- DVD
- Temperature detector circuits
- Embedded system
- In-vehicle system