Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
56 |
Weight |
252.792698mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74ALVCH |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
1.65V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.5mm |
Base Part Number |
74ALVCH162835 |
Pin Count |
56 |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Number of Channels |
18 |
Number of Circuits |
18-Bit |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
12mA |
Number of Bits |
18 |
Propagation Delay |
6.1 ns |
Turn On Delay Time |
6.5 ns |
Family |
ALVC/VCX/A |
Direction |
Unidirectional |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Current - Output High, Low |
12mA 12mA |
Logic Type |
Universal Bus Driver |
Prop. Delay@Nom-Sup |
5.4 ns |
Control Type |
ENABLE LOW |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ALVCH162835GR Overview
The package 56-TFSOP (0.240, 6.10mm Width) contains this file embedded in it. Cut Tape (CT) is the way it is packaged. In order to achieve this superior flexibility, 18-Bit circuits are used. This electrical device has a logic type of Universal Bus Driver, which means that it is a logic device. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. The operating temperature should be higher than -40°C~85°C. In addition, 12mA 12mA features the highest level of flexibility in its design due to its high and low output currents. An FPGA belonging to the 74ALVCH series is a type of FPGA. The supply voltage is 1.65V~3.6V. The 74ALVCH162835 family is the one that this is part of. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Keeping the supply voltage above 1.8V is necessary for normal operation of the device. In addition, it is equipped with a 56 pin count. It is designed with 18 Bits. There are a number of termination types, including 2 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. 56 pins are used in the design of this board. The device belongs to the ALVC/VCX/A family of electronic devices. A maximum supply voltage (Vsup) is reached at 3.6V. The power source is 3.3V. 1 elements are included in it. Based on its reliable performance, this device is most suitable for TAPE AND REEL because of its robust design. Because of 12mA's output current, it is very versatile due to its maximum design flexibility. In Bus Driver/Transceivers, there is this part. The number of channels is growing strong/weak: 18.
SN74ALVCH162835GR Features
56-TFSOP (0.240, 6.10mm Width) package
74ALVCH series
74ALVCH162835 family
56 pin count
56 pins
3.3V power supplies
1 elements
SN74ALVCH162835GR Applications
There are a lot of Texas Instruments SN74ALVCH162835GR Universal Bus Functions applications.
- Square wave oscillators
- Small and medium distributed photovoltaic power generation system
- CMOS circuitry
- Alarm circuit using LDR
- Various travel, camping, medical emergency appliances
- Networking
- Washing machine
- Memory devices
- automatic temperature control circuits
- Overcurrent/Short circuit protection