Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74ALVCH |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
1.65V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Frequency |
10MHz |
Base Part Number |
74ALVCH162841 |
Pin Count |
56 |
Output Type |
Tri-State |
Number of Elements |
2 |
Circuit |
10:10 |
Polarity |
Non-Inverting |
Supply Voltage-Min (Vsup) |
1.65V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
12mA |
Number of Bits |
20 |
Propagation Delay |
4.3 ns |
Turn On Delay Time |
1 ns |
Family |
ALVC/VCX/A |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
12mA 12mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW/HIGH |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Output Lines |
3 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
2.79mm |
Length |
18.41mm |
Width |
7.49mm |
Thickness |
2.59mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ALVCH162841DL Overview
In the package 56-BSSOP (0.295, 7.50mm Width), it can be found. A package of Tube has been used. In its configuration, Tri-State is used as the output. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. The voltage supply is 1.65V~3.6V. A temperature of -40°C~85°C is set as the operating temperature. The 74ALVCH series is associated with this FPGA. There are 20 bits in this electronic part. In this device, there are 56 terminations. 74ALVCH162841 is the family name of it. In order to operate it, the supply voltage must be 1.8V. 56 pins are included. In terms of electronic devices, this one is in the ALVC/VCX/A family. This board has 56 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. FF/Latches is the subcategory of this part. It is recommended that the supply voltage (Vsup) be greater than 1.65V. With 12mA, maximum design flexibility is ensured. 3 output lines generate the binary equivalent of the input lines. There are 2 elements in it. In order to operate properly, its maximum power current (ICC) should be 0.04mA.
SN74ALVCH162841DL Features
56-BSSOP (0.295, 7.50mm Width) package
74ALVCH series
20 Bits
74ALVCH162841 family
56 pin count
56 pins
2 elements
SN74ALVCH162841DL Applications
There are a lot of Texas Instruments SN74ALVCH162841DL Latches applications.
- Automotive Cluster
- Serial Input
- Counting
- Decade counting
- Shift Registers
- Up/down difference counting
- Parallel-to-Serial Data Conversion
- Shift right with parallel loading
- Automotive HEV/EV Powertrain
- Double bus register system