SN74ALVCH162841GR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ALVCH162841 |
| Pin Count | 56 |
| Output Type | Tri-State |
| Number of Elements | 2 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 20 |
| Propagation Delay | 5.9 ns |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVCH162841GR Overview
The package in which it is embedded is named 56-TFSOP (0.240, 6.10mm Width). It is packaged in the way of Cut Tape (CT). It uses Tri-State as its output configuration. In this electrical device, the logic type is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 1.65V~3.6V. It operates at -40°C~85°C degrees Celsius. An FPGA in this series belongs to the 74ALVCH family. The design of this electronic part contains 20 bits. This device has 56 terminations. 74ALVCH162841 is the family name of it. The device is operated when the supply voltage is set to 1.8V. 56 pins are available on it. It is part of the family of electronic devices called ALVC/VCX/A. It is designed with 56 pins. Surface Mount is the method used for mounting this electronic part. In this device, there is a total of 2 ports available for use. The part belongs to the FF/Latches subcategory. The supply voltage (Vsup) should be greater than 1.65V. Based on its reliable performance, this device is suitable for TR. With 12mA, maximum design flexibility is ensured. It follows that 3 output lines are generated from the binary equivalent of the input line. 2 elements are present in it. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA.
SN74ALVCH162841GR Features
56-TFSOP (0.240, 6.10mm Width) package
74ALVCH series
20 Bits
74ALVCH162841 family
56 pin count
56 pins
2 elements
SN74ALVCH162841GR Applications
There are a lot of Texas Instruments SN74ALVCH162841GR Latches applications.
- Control circuits
- Parallel data storage
- Serial Output Register
- Registers
- Parallel-to-Serial Data Conversion
- OC-48 communication systems
- Counters
- Watches
- BCD counting
- Ring counter
