SN74ALVCH16334DGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Weight | 120.003531mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALVCH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCH16334 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Circuits | 16-Bit |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 3.3 ns |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Universal Bus Driver |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Height Seated (Max) | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVCH16334DGVR Overview
Embedded in the 48-TFSOP (0.173, 4.40mm Width) package, it is used by many applications. It is packaged in a way that resembles Cut Tape (CT). A 16-Bit circuit is used for achieving its superior flexibility as a result of its use of 16-Bit circuits. The Logic type of this electrical device is Universal Bus Driver. The electronic part is mounted in Surface Mount-direction. A higher operating temperature than -40°C~85°C is recommended. High/Low output currents allow 24mA 24mA to have a maximum design flexibility. It belongs to the 74ALVCH series of FPGAs. The supply voltage for the machine is 1.65V~3.6V and it operates on that voltage. 74ALVCH16334 family is its parent. The 48 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. Normal operation requires an output voltage above 1.8V. The pin count is 48. This electronic part is designed with 16 Bits. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In this case, the electronic part is mounted in the direction of Surface Mount. It is designed with 48 pins. It is a ALVC/VCX/A-family electronic device. Upon reaching 3.6V, Vsup reaches its maximal value. It is recommended that the supply voltage (Vsup) should be greater than 1.65V. 3.3V power supplies power it. The reliability of this device makes it well suited for TAPE AND REEL as a result of its proven reliability. As part of Bus Driver/Transceivers, this part is included.
SN74ALVCH16334DGVR Features
48-TFSOP (0.173, 4.40mm Width) package
74ALVCH series
74ALVCH16334 family
48 pin count
48 pins
3.3V power supplies
SN74ALVCH16334DGVR Applications
There are a lot of Texas Instruments SN74ALVCH16334DGVR Universal Bus Functions applications.
- Automatic digital control circuits
- Ship
- Sewing machine
- Reactive power compensation function
- Fax machine
- TTL (Transistor Transistor Logic) circuitry
- Small and medium off-grid systems
- Solar street light
- Air conditioner
- Overcurrent/Short circuit protection
