banner_page

SN74ALVCH16373DL

D-Type, Latch 1.65V~3.6V 16 Bits Tri-State Latches 74ALVCH Series 74ALVCH16373 48 Pins DUAL CMOS 48-BSSOP (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALVCH16373DL
  • Package: 48-BSSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 213
  • Description: D-Type, Latch 1.65V~3.6V 16 Bits Tri-State Latches 74ALVCH Series 74ALVCH16373 48 Pins DUAL CMOS 48-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-BSSOP (0.295, 7.50mm Width)
Number of Pins 48
Weight 600.301152mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ALVCH
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 1.8V
Base Part Number 74ALVCH16373
Pin Count 48
Output Type Tri-State
Number of Elements 2
Circuit 8:8
Polarity Non-Inverting
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 16
Propagation Delay 3.6 ns
Quiescent Current 40μA
Turn On Delay Time 1 ns
Family ALVC/VCX/A
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW/HIGH
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 3
Number of Output Lines 1
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.79mm
Length 15.88mm
Width 7.49mm
Thickness 2.59mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ALVCH16373DL Overview


Package 48-BSSOP (0.295, 7.50mm Width) includes it. Tube is the way it is packaged. It uses Tri-State as the output. A D-Type Transparent Latch logic type is used in this electrical device. The electronic component is mounted according to the Surface Mount method. In order for it to operate, it needs a supply voltage of 1.65V~3.6V. The temperature at which the machine is operating is -40°C~85°C. An FPGA of this type belongs to the 74ALVCH series. An electronic part with 16 bits is designed. This device has been designed with 48 terminations available. It belongs to 74ALVCH16373 family. The device works with a voltage of 1.8V for its supply voltage. There are 48 pins attached to it. ALVC/VCX/A is the family of this electronic device. 48 pins are used in its design. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports that can be connected to it. This part can be found within the FF/Latches subcategory. Input Lines consist of electronic circuits, and there are 3. It features maximum flexibility in design due to 24mA output current. A binary equivalent of the input line is generated by the 1 output lines. It consumes 40μA of quiescent current without being affected by outside factors. 2 elements are present in it. The maximal power current (ICC) supplied for its operation reaches 0.04mA.

SN74ALVCH16373DL Features


48-BSSOP (0.295, 7.50mm Width) package
74ALVCH series
16 Bits
74ALVCH16373 family
48 pin count
48 pins
2 elements

SN74ALVCH16373DL Applications


There are a lot of Texas Instruments SN74ALVCH16373DL Latches applications.

  • Bus system register with enable parallel lines at bus side
  • BCD counting
  • Frequency
  • Automotive HEV/EV Powertrain
  • Sample and hold register
  • Accumulator Registers
  • Automotive Infotainment
  • Display
  • Serial Output Data Queuing
  • Communication systems

Write a review

Note: HTML is not translated!
    Bad           Good