Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
48 |
Weight |
600.301152mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74ALVCH |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
1.65V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.635mm |
Base Part Number |
74ALVCH16373 |
Pin Count |
48 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
1.65V |
Number of Circuits |
16 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
4.9 ns |
Quiescent Current |
40μA |
Turn On Delay Time |
1 ns |
Family |
ALVC/VCX/A |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Prop. Delay@Nom-Sup |
3.6 ns |
Control Type |
ENABLE LOW/HIGH |
Power Supply Current-Max (ICC) |
0.04mA |
Independent Circuits |
2 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
2.79mm |
Length |
15.88mm |
Width |
7.49mm |
Thickness |
2.59mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ALVCH16373DLR Overview
Package 48-BSSOP (0.295, 7.50mm Width) includes it. A package of Cut Tape (CT) has been used. It uses the output configuration Tri-State. This electrical device has Logic type D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V, it operates. A temperature of -40°C~85°C is set as the operating temperature. The 74ALVCH series of FPGAs is the one this FPGA belongs to. It is designed with 8 bits. The device consists of 48 terminations that are designed to be used in conjunction with it. It belongs to 74ALVCH16373 family. The device works with a voltage of 1.8V for its supply voltage. With 48 pins, it is equipped. It is part of the family of electronic devices called ALVC/VCX/A. 48 pins are used in its design. It is mounted according to the Surface Mount method. As far as ports are concerned, this device has 2 ports. FF/Latches is the subcategory of this part. It reaches 3.6V when the supply voltage (Vsup) reaches maximum. There are 3.3V power supplies required for this machine to operate. It is recommended that the supply voltage (Vsup) be greater than 1.65V. Based on its reliable performance, this device is well suited to TR. With 24mA, maximum design flexibility is ensured. It consumes 40μA of quiescent current without being affected by outside factors. Its superior flexibility is achieved by using 16 circuits. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA.
SN74ALVCH16373DLR Features
48-BSSOP (0.295, 7.50mm Width) package
74ALVCH series
8 Bits
74ALVCH16373 family
48 pin count
48 pins
3.3V power supplies
SN74ALVCH16373DLR Applications
There are a lot of Texas Instruments SN74ALVCH16373DLR Latches applications.
- Buffer/Storage Registers
- Clocks
- Decade counting 7-segment decimal display
- Buffer Storage
- General-Purpose Register
- Shift left register
- Relay
- Pattern Generators
- Flip-flops
- Counter control