SN74ALVCH16374DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCH16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 4.9 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.2ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALVCH16374DGGR Overview
The flip flop is packaged in 48-TFSOP (0.240, 6.10mm Width). D flip flop is included in the Cut Tape (CT)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~3.6V. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74ALVCHseries contain this type of chip. Its output frequency should not exceed 150MHz. In total, it contains 2 elements. A total of 48terminations have been recorded. D latch belongs to the 74ALVCH16374 family. The power supply voltage is 1.8V. A JK flip flop with a 3pFfarad input capacitance is used here. A device of this type belongs to the family of ALVC/VCX/A. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 48 pins. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. The flip flop is designed with 16bits. Normally, the supply voltage (Vsup) should be kept above 1.65V. This D flip flop is well suited for TR based on its reliable performance. The flip flop contains 2ports. With a current output of 24mA , it offers maximum design flexibility. To operate, the chip has a total of 3 output lines. As a result, it consumes 40μA of quiescent current without being affected by external factors.
SN74ALVCH16374DGGR Features
Cut Tape (CT) package
74ALVCH series
48 pins
16 Bits
SN74ALVCH16374DGGR Applications
There are a lot of Texas Instruments SN74ALVCH16374DGGR Flip Flops applications.
- Data transfer
- Synchronous counter
- Computers
- Bounce elimination switch
- Buffered Clock
- Balanced Propagation Delays
- Common Clocks
- Dynamic threshold performance
- QML qualified product
- Load Control
